#!/bin/sh
# This file was automatically created - don't modify it!
#%%SOURCEINFO-START%%
# source version: $Id: $
# installed by port/package: %%SOURCEINFO-PACKAGE%%
# installed from file: %%SOURCEINFO-FILE%%
#%%SOURCEINFO-END%%
if [ -n "$MULTIEXEC_WRAPPER_VERBOSE" ]
then
	QUIET=0
else
	QUIET=1
fi
#%%PKG-INSTALL-START%%
# ===== IMPORTANT =====
# If you modify any byte of this script outside of the
# %%SOURCEINFO-*%% and #%%PKG-INSTALL-*%% sections, then
# don't forget to bump the MINOR version variable below!
#
case "$2" in
	# no-op cases if called as port/package de/installation script
	PRE-INSTALL|POST-DEINSTALL)
		exit 0
		;;
esac
#%%PKG-INSTALL-END%%

ME=multiexec-wrapper
CALLED_NAME="`basename $0`"
PREFIX=%%PREFIX%%
CONFIG="$PREFIX/etc/$ME.conf"

lookup_executable() {
	local calledname pkgname name executable rest \
		portname version envvarname envvarversion result
	# use global variable for the result to avoid subshell
	lookup_executable_result=
	[ -r "$CONFIG" ] || return 1
	calledname="$1"
	result=
	while read pkgname name executable rest
	do
		if [ "$name" = "$calledname" -a -n "$executable" ]
		then
			result="$executable"
			portname=`expr "$pkgname" : "\(.*\)-"`
			envvarname="`echo -n "$portname" | \
					tr "[:lower:]" "[:upper:]" | \
					tr -cs "[:alnum:]" "_"`"
			# <PORTNAME> variable selects package if name matches
			eval envvarvalue='$'"$envvarname"
			if [ -n "$envvarvalue" ]
			then
				break
			fi
			# <PORTNAME>_VERSION variable selects package version
			version=`expr "$pkgname" : ".*-\([^-_,]*\)"`
			eval envvarversion='$'"$envvarname"_VERSION
			if [ "$envvarversion" = "$version" ]
			then
				break
			fi
		fi
	done < "$CONFIG"
	lookup_executable_result="$result"
}

warn () {
	echo "${ME}: $1" 1>&2
}

die () {
	warn "$1"
	exit 1
}

# Normal usage: if called through a symlink,
#               lookup and exec a registered executable.

if [ -L "$0" -a "$CALLED_NAME" != "$ME" ]
then
	lookup_executable "$CALLED_NAME"
	executable="$lookup_executable_result"
	if [ -x "$executable" ]
	then
		exec "$executable" "$@"
	elif [ -z "$executable" ]
	then
		die "no executable registered for '$CALLED_NAME'."
	elif [ ! -e "$executable" ]
	then
		die "$executable does not exist."
	else
		die "$executable is not executable."
	fi
fi

EPOCH=1
CONFIG_FORMAT=1
MAJOR=1
MINOR=1
VERSION=$EPOCH.$CONFIG_FORMAT.$MAJOR.$MINOR

usage() {
	echo "usage: $ME <cmd> <arg> ..."
	echo "       with one of the following <cmd>s:"
#%%PKG-INSTALL-START%%
	echo "  install-self-to <prefix> <pkgname>"
	echo "  deinstall-self-from <prefix>"
#%%PKG-INSTALL-END%%
	echo "  deinstall-pkg <pkgname>"
	echo "  register <pkgname> <name> <executable>"
	echo "  unregister <pkgname> <name> <executable>"
	echo "  version"
	echo "  which <name>"
	echo "  list-all-packages"
	echo "  list-packages-for-name <name>"
	exit 1
}

say () {
	[ $QUIET -gt 0 ] || echo "${ME}: $1"
}

version() {
	echo "$VERSION"
	exit 0
}

which() {
	local name executable
	name="$1"
	lookup_executable "$name"
	executable="$lookup_executable_result"
	[ -z "$executable" ] && return 1
	echo "$executable"
}

#%%PKG-INSTALL-START%%
install_self_to() {
	local pkgname myself target oldversion tmpfile tmpfile_gz
	PREFIX="$1"
	pkgname="$2"
	if [ "$0" = "/bin/sh" ]
	then	# We're stdin of a shell (installation from binary package).
		# Recover original script from its b64encoded compressed source.
		tmpfile=`mktemp "/tmp/$ME.XXXXXX"`
		tmpfile_gz=`mktemp "/tmp/$ME.gz.XXXXXX"`
		trap "rm -f $tmpfile $tmpfile_gz" EXIT
		b64decode -p > $tmpfile_gz << '~EOF~'
~EOF~
		gunzip -cf $tmpfile_gz > $tmpfile || die "decompression of script source for $ME failed."
		myself=$tmpfile
	else
		myself=`realpath "$0"`
	fi
	target="$PREFIX/bin/$ME"
	MYSELF_INSTALLED="$target"
	if [ -e "$target" ]
	then
		if [ ! -x "$target" ]
		then
			die "$target already exists but is not executable."
		else
			oldversion=`$target version 2>/dev/null`
			if [ $? -ne 0 ]
			then
				die "bogus $target already exists."
			elif [ "$oldversion" = "$VERSION" ]
			then
				oldmd5=`sed -e '/^#%%PKG-INSTALL-START%%$/,/^#%%PKG-INSTALL-END%%$/d' \
	    					-e '/^#%%SOURCEINFO-START%%$/,/^#%%SOURCEINFO-END%%$/d' \
	    					-e 's?\%\%PREFIX\%\%?'"$PREFIX"'?g' "$target" | \
				        md5 -q`
				newmd5=`sed -e '/^#%%PKG-INSTALL-START%%$/,/^#%%PKG-INSTALL-END%%$/d' \
	    					-e '/^#%%SOURCEINFO-START%%$/,/^#%%SOURCEINFO-END%%$/d' \
	    					-e 's?\%\%PREFIX\%\%?'"$PREFIX"'?g' "$myself" | \
				       md5 -q`
				if [ "$newmd5" = "$oldmd5" ]
				then
					say "$myself (version $VERSION) already installed as $target."
					return
				else
					die "$myself and $target have same version ($VERSION) but differ."
				fi
			elif [ `pkg_version -t "$oldversion" "$VERSION"` != "<" ]
			then
				say "$myself (version $VERSION) is not newer than $target (version $oldversion)."
			fi
		fi
	elif [ ! -d `dirname $target` ]
	then
		if [ -e `dirname $target` ]
		then
			die "`dirname $target` is not a directory."
		else
			mkdir -p `dirname $target` || die "could not create `dirname $target`"
		fi
	fi
	if [ ! -d `dirname $CONFIG` ]
	then
		if [ -e `dirname $CONFIG` ]
		then
			die "`dirname $CONFIG` is not a directory."
		else
			mkdir -p `dirname $CONFIG` || die "could not create `dirname $CONFIG`"
		fi
	fi
	if sed -e '/^#%%PKG-INSTALL-START%%$/,/^#%%PKG-INSTALL-END%%$/d' \
	       -e 's?%%SOURCEINFO-PACKAGE%%?'"$pkgname"'?g' \
	       -e 's?%%SOURCEINFO-FILE%%?'"$myself"'?g' \
	       -e 's?\%\%PREFIX\%\%?'"$PREFIX"'?g' "$myself" > "$target" && \
	   chmod +x "$target"
	then
		say "$myself (version $VERSION) installed as $target."
		return
	else
		die "failed to install $ME (version $VERSION) as $target."
	fi
}

deinstall_self_from() {
	local config_empty=1
	PREFIX="$1"
	MYSELF_INSTALLED="$PREFIX/bin/$ME"
	CONFIG="$PREFIX/etc/$ME.conf"
	if [ ! -e "$CONFIG" ]
	then
		say "$CONFIG does not exist."
	elif grep -v -q "^/SELF/" "$CONFIG"
	then
		say "$CONFIG is not empty."
		config_empty=0
	elif rm -f "$CONFIG"
	then
		say "$CONFIG removed."
		if rmdir `dirname $CONFIG`
		then
			say "`dirname $CONFIG` removed"
		fi
	else
		warn "failed to remove $CONFIG."
	fi
	if [ "$config_empty" -eq 1 ]
	then
		if [ ! -e "$MYSELF_INSTALLED" ]
		then
			warn "$MYSELF_INSTALLED does not exist."
		elif rm -f "$MYSELF_INSTALLED"
		then
			say "$MYSELF_INSTALLED removed."
			if rmdir `dirname $MYSELF_INSTALLED`
			then
				say "`dirname $MYSELF_INSTALLED` removed"
			fi
		else
			warn "failed to remove $MYSELF_INSTALLED."
		fi
	fi
}

#%%PKG-INSTALL-END%%

config_init() {
	local format oldformat pkgname name executable rest
	format="$EPOCH.$CONFIG_FORMAT"
	if [ -r "$CONFIG" -a -s "$CONFIG" ]
	then
		oldformat=`cat "$CONFIG" | \
			while read pkgname name executable rest
			do
				if [ "$pkgname" = "/SELF/" -a "$name" = "/FORMAT/" ]
				then
					echo "$executable"
					break
				fi
			done`
		if [ -z "$oldformat" ]
		then
			say "old $CONFIG has no format information - backing up ..."
			if mv "$CONFIG" "$CONFIG.bak"
			then
				say "... done"
			else
				die "failed to backup old $CONFIG."
			fi
		elif [ "$oldformat" = "$format" ]
		then
			say "matching format statement found in $CONFIG."
		else
			# XXX compare versions and try to upgrade if appropriate
			die "differing format statement found in $CONFIG ($executable instead of $format)."
		fi
	elif echo "/SELF/	/FORMAT/	$format" > "$CONFIG"
	then
		say "$CONFIG initialized."
	else
		die "failed to initialize $CONFIG"
	fi
}

lookup_matches() {
	local pkgname name executable rest p n e r
	pkgname="$1"
	name="$2"
	executable="$3"
	[ -r "$CONFIG" ] || return 1
	cat "$CONFIG" | \
	while read p n e r
	do
		[ "$pkgname" = "" -o "$p" = "$pkgname" ] && \
		[ "$name" = "" -o "$n" = "$name" ] && \
		[ "$executable" = "" -o "$e" = "$executable" ] && \
		echo "$p	$n	$e"
	done
	return 0
}

config_add() {
	local pkgname name executable matches
	pkgname="$1"
	name="$2"
	executable="$3"
	if [ ! -e "$CONFIG" ]
	then
		config_init
	fi
	if [ ! -r "$CONFIG" ]
	then
		die "$CONFIG not readable."
	else
		matches=`lookup_matches "$pkgname" "$name" "$executable"`
		if [ -n "$matches" ]
		then
			say "already registered in $CONFIG: $pkgname $name $executable"
			return
		elif [ ! -w "$CONFIG" ]
		then
			die "$CONFIG is not writeable"
		fi
	fi
	if echo "$pkgname	$name	$executable" >> "$CONFIG"
	then
		say "now added to config: $pkgname $name $executable"
	else
		die "write failed while trying to add to $CONFIG: $pkgname $name $executable"
	fi
}

config_delete() {
	local pkgname name executable matches
	pkgname="$1"
	name="$2"
	executable="$3"
	if [ ! -e "$CONFIG" ]
	then
		die "failed to delete from config: $CONFIG does not exist."
	elif [ ! -r "$CONFIG" ]
	then
		die "$CONFIG not readable."
	else
		matches=`lookup_matches "$pkgname" "$name" "$executable"`
		if [ -z "$matches" ]
		then
			say "no entry found in config for: $pkgname $name $executable."
		elif [ ! -w "$CONFIG" ]
		then
			die "$CONFIG is not writeable."
		elif [ ! -w `dirname "$CONFIG"` ]
		then
			die "config directory `dirname $CONFIG` is not writeable."
		elif awk '$1 != "'"$pkgname"'" || \
			  $2 != "'"$name"'" || \
			  $3 != "'"$executable"'"' \
			 "$CONFIG" > "$CONFIG.new"
		then
			if diff -q "$CONFIG" "$CONFIG.new" >/dev/null
			then
				say "failed to delete from config (match problem): $pkgname $name $executable."
				rm "$CONFIG.new"
			elif mv -f "$CONFIG.new" "$CONFIG"
			then
				say "deleted from config: $pkgname $name $executable."
			else
				die "failed to update $CONFIG."
			fi
		else
			die "failed to create new config $CONFIG.new."
		fi
	fi
}

register() {
	local pkgname name executable savedwd
	pkgname="$1"
	name="$2"
	executable="$3"
	savedwd=$PWD
	if [ ! -e "$executable" ]
	then
		die "won't register ${name}: $executable does not exist"
	elif [ ! -x "$executable" ]
	then
		die "won't register ${name}: $executable is not executable"
	elif cd "$PREFIX/bin"
	then
		if [ -e "$name" ]
		then
			if [ -L "$name" ]
			then
				target=`readlink $name`
				if [ "$target" = "$ME" ]
				then
					say "symlink $name -> $ME already exists."
				else
					die "symlink $name already exists, but does not point to $ME (instead to $target)."
				fi
			else
				die "$name already exists, but is not a symlink."
			fi
		else
			if ln -s "$ME" "$name"
			then
				say "symlink $name -> $ME created."
			else
				die "failed to create symlink $name -> $ME."
			fi
		fi
		config_add "$pkgname" "$name" "$executable"
	else
		die "can't cd to $PREFIX/bin."
	fi
	cd "$savedwd"
}

unregister() {
	local pkgname name executable savedwd matches count
	pkgname="$1"
	name="$2"
	executable="$3"
	savedwd=$PWD
	if [ ! -e "$executable" ]
	then
		say "while unregistering ${name}: $executable does not exist"
	elif [ ! -x "$executable" ]
	then
		say "while unregistering ${name}: $executable is not executable"
	fi
	if cd "$PREFIX/bin"
	then
		if [ ! -e "$name" ]
		then
			say "symlink $name does not exist."
		elif [ ! -L "$name" ]
		then
			say "$name exists, but is not a symlink."
		else		
			target=`readlink $name`
			if [ "$target" != "$ME" ]
			then
				say "symlink $name exists, but does not point to $ME (instead to $target)."
			else
				matches=`lookup_matches "" "$name"`
				count=`printf "%s" "$matches" | wc -l`
				if [ "$count" -eq 0 -o \
					\( "$count" -eq 1 -a \
					   `expr "$matches" : "${pkgname}-"` -gt 0 \) ]
				then
					if rm -f "$name"
					then
						say "symlink $name removed."
					else
						die "failed to remove symlink $name -> $ME."
					fi
				else
					say "not removing symlink $name because of further config entries."
				fi
			fi
		fi
		config_delete "$pkgname" "$name" "$executable"
	else
		die "can't cd to $PREFIX/bin."
	fi
	cd "$savedwd"
}

deinstall_pkg() {
	local pkgname matches count p n e r
	pkgname="$1"
	matches=`lookup_matches "$pkgname"`
	if [ $? -ne 0 ]
	then
		die "reading $CONFIG failed."
	elif [ -z "$matches" ]
	then
		say "no entries for package $package in $CONFIG."
	else
		count=`printf "%s" "$matches" | wc -l`
		say "trying to unregister $count entries for package $pkgname."
		cat "$CONFIG" | \
		while read p n e r
		do
			if [ "$p" = "$pkgname" ]
			then
				if [ -z "$n" ]
				then
					warn "in $CONFIG: incomplete config entry (no name) found for package $pkgname."
				elif [ -z "$e" ]
				then
					warn "in $CONFIG: incomplete config entry (no executable) found for package $pkgname, name $name."
				else
					unregister  "$pkgname" "$n" "$e"
				fi
			fi
		done
	fi
}


#%%PKG-INSTALL-START%%
case "$2" in
	POST-INSTALL)
		PKGNAME="$1"
		install_self_to "$PKG_PREFIX" "$PKGNAME"
		"$MYSELF_INSTALLED" config-init || die "config-init of $CONFIG failed."
		for exename in %%EXENAMES%%
		do
			exepath="$PKG_PREFIX/%%EXEBINDIR%%/$exename"
			if [ -x "$exepath" ]
			then
				"$MYSELF_INSTALLED" register "$PKGNAME" "$exename" "$exepath" \
				|| die "failure during registration - aborting."
			else
				die "not an executable: $exepath."
			fi
		done
		;;
	DEINSTALL)
		PKGNAME="$1"
		PREFIX="$PKG_PREFIX"
		CONFIG="$PREFIX/etc/$ME.conf"
		MYSELF_INSTALLED="$PREFIX/bin/$ME"
		doitmyself=0
		if [ ! -e "$MYSELF_INSTALLED" ]
		then
			say "$ME was not (or is no longer) installed as $MYSELF_INSTALLED."
			doitmyself=1
		elif [ ! -x "$MYSELF_INSTALLED" ]
		then
			say "$MYSELF_INSTALLED is not executable."
			doitmyself=1
		fi
		if [ "$doitmyself" -eq 0 ]
		then
			"$MYSELF_INSTALLED" deinstall-pkg "$PKGNAME"
		else
			deinstall_pkg "$PKGNAME"
		fi
		deinstall_self_from "$PKG_PREFIX"
		;;
esac
#%%PKG-INSTALL-END%%

list_all_packages() {
	grep -v "^/" "$CONFIG" | \
	awk '{ print $1 }' | \
	uniq
}

list_packages_for_name() {
	local name="$1"
	lookup_matches "" "$name" "" | \
	awk '{ print $1 }'
}

# main

case "$1" in
""|-h|--help)
	usage
	;;
#%%PKG-INSTALL-START%%
install-self-to)
	install_self_to "$2" "$3"
	;;
deinstall-self-from)
	deinstall_self_from "$2"
	;;
#%%PKG-INSTALL-END%%
version)
	version
	;;
which)
	which "$2"
	;;
config-init)
	config_init
	;;
register)
	register "$2" "$3" "$4"
	;;
unregister)
	unregister "$2" "$3" "$4"
	;;
deinstall-pkg)
	deinstall_pkg "$2"
	;;
list-all-packages)
	list_all_packages "$2"
	;;
list-packages-for-name)
	list_packages_for_name "$2"
	;;
esac