update-leap User’s Manual

Previous: , Up: (dir)  

Top

This document describes the use of the NTP Project’s update-leap program.

This document applies to version 4.2.8p18 of update-leap.

Short Table of Contents

  • 1 Invoking update-leap

  • Up: Top  

    1 Invoking update-leap

    update-leap will validate the file currently on the local system and if necessary, updates leap-second definition file.

    Ordinarily, the file is found using the "leapfile" directive in ntp.conf(5). However, an alternate location can be specified on the command line.

    If the file does not exist, is not valid, has expired, or is expiring soon, a new copy will be downloaded. If the new copy validates, it is installed and NTP is (optionally) restarted.

    If the current file is acceptable, no download or restart occurs.

    -c can also be used to invoke another script to perform administrative functions, e.g. to copy the file to other local systems. .PP This can be run as a cron job. As the file is rarely updated, and leap seconds are announced at least one month in advance (usually longer), it need not be run more frequently than about once every three weeks. .PP For cron-friendly behavior, define CRONJOB=1 in the crontab. .PP This script depends on$REQUIREDCMDS

    This section was generated by AutoGen, using the agtexi-cmd template and the option descriptions for the update-leap program.


    Next: , Up: update-leap Invocation  

    1.1 update-leap help/usage (--help)

    This is the automatically generated usage text for update-leap.

    The text printed is the same whether selected with the help option (--help) or the more-help option (--more-help). more-help will print the usage text by passing it through a pager program. more-help is disabled on platforms without a working fork(2) function. The PAGER environment variable is used to select the program, defaulting to more. Both will exit with a status code of 0.

    
    Usage: update-leap [options]
    
    Verifies and if necessary, updates leap-second definition file
    
    All arguments are optional:  Default (or current value) shown:
        -C    Absolute path to CA Cert (see SSL/TLS Considerations)
        -D    Path to a CAdir (see SSL/TLS Considerations)
        -e    Specify how long (in days) before expiration the file is to be
                  refreshed.  Note that larger values imply more frequent refreshes.
              60
        -F    Force update even if current file is OK and not close to expiring.
        -f    Absolute path ntp.conf file (default /etc/ntp.conf)
              /etc/ntp.conf
        -h    show help
        -i    Specify number of minutes between retries
              10
        -L    Absolute path to leapfile on the local system
              (overrides value in ntp.conf)
        -l    Specify the syslog(3) facility for logging
              LOG_USER
        -q    Only report errors (cannot be used with -v)
        -r    Specify number of attempts to retrieve file
              6
        -s    Send output to syslog(3) - implied if STDOUT has no tty or redirected
        -t    Send output to terminal - implied if STDOUT attached to terminal
        -u    Specify the URL of the master copy to download
              https://www.ietf.org/timezones/data/leap-seconds.list
        -v    Verbose - show debug messages (cannot be used with -q)
    
    The following options are not (yet) implemented in the perl version:
        -4    Use only IPv4
        -6    Use only IPv6
        -c    Command to restart NTP after installing a new file
              <none> - ntpd checks file daily
        -p 4|6
              Prefer IPv4 or IPv6 (as specified) addresses, but use either
    
    update-leap will validate the file currently on the local system.
    
    Ordinarily, the leapfile is found using the 'leapfile' directive in
    /etc/ntp.conf.  However, an alternate location can be specified on the
    command line with the -L flag.
    
    If the leapfile does not exist, is not valid, has expired, or is
    expiring soon, a new copy will be downloaded.  If the new copy is
    valid, it is installed.
    
    If the current file is acceptable, no download or restart occurs.
    
    This can be run as a cron job.  As the file is rarely updated, and
    leap seconds are announced at least one month in advance (usually
    longer), it need not be run more frequently than about once every
    three weeks.
    
    SSL/TLS Considerations
    -----------------------
    The perl modules can usually locate the CA certificate used to verify
    the peer's identity.
    
    On BSDs, the default is typically the file /etc/ssl/certs.pem.  On
    Linux, the location is typically a path to a CAdir - a directory of
    symlinks named according to a hash of the certificates' subject names.
    
    The -C or -D options are available to pass in a location if no CA cert
    is found in the default location.
    
    External Dependencies
    ---------------------
    The following perl modules are required:
    HTTP::Tiny         - version >= 0.056
    IO::Socket::SSL - version >= 1.56
    NET::SSLeay         - version >= 1.49
    
    Version: 1.004
    

    Next: , Previous: , Up: update-leap Invocation  

    1.2 source-url option (-s)

    This is the “the url of the master copy of the leapseconds file” option. This option takes a string argument. Specify the URL of the master copy to download $LEAPSRC


    Next: , Previous: , Up: update-leap Invocation  

    1.3 ipv4 option (-4)

    This is the “use only ipv4 addresses for dns name resolution” option.

    This option has some usage constraints. It:

    Force DNS resolution of following host names on the command line to the IPv4 namespace. _EndOfDoc_; ;

    flag = name = ipv6; flags-cant = ipv4, prefer; value = 6; descrip = "Use only IPv6 addresses for DNS name resolution"; doc = <<- _EndOfDoc_ Force DNS resolution of following host names on the command line to the IPv6 namespace. _EndOfDoc_; ;

    flag = name = prefer; flags-cant = ipv4, ipv6; value = p; arg-type = keyword; keyword = 4, 6; descrip = ’Prefer IPv4 or IPv6 (as specified) addresses, but use either’; doc = <<- _EndOfDoc_ Prefer IPv4 or IPv6 (as specified) addresses, but use either.


    Next: , Previous: , Up: update-leap Invocation  

    1.4 destination option (-d)

    This is the “filename on the local system” option. This option takes a string argument float. The name to use to store the leapfile on the local system. $LEAPFILE


    Next: , Previous: , Up: update-leap Invocation  

    1.5 expiration option (-e)

    This is the “refresh the leapfile this long before it expires” option. This option takes a string argument. Specify how long before expiration the file is to be refreshed Units are required, e.g. "-e 60 days" Note that larger values imply more frequent refreshes. "$PREFETCH"


    Next: , Previous: , Up: update-leap Invocation  

    1.6 ntp-conf-file option (-f)

    This is the “location of the ntp.conf file” option. This option takes a string argument. Specify location of ntp.conf (used to make sure leapfile directive is present and to default leapfile) /etc/ntp.conf


    Next: , Previous: , Up: update-leap Invocation  

    1.7 force-update option (-F)

    This is the “force update of the leapfile” option. Force update even if current file is OK and not close to expiring.


    Next: , Previous: , Up: update-leap Invocation  

    1.8 update-leap exit status

    One of the following exit values will be returned:

    0 (EXIT_SUCCESS)

    Successful program execution.

    1 (EXIT_FAILURE)

    The operation failed or the command syntax was not valid.


    Next: , Previous: , Up: update-leap Invocation  

    1.9 update-leap Usage


    Previous: , Up: update-leap Invocation  

    1.10 update-leap Authors