.\" $NetBSD: blacklistd.conf.5,v 1.7 2017/06/07 13:50:57 wiz Exp $ .\" .\" Copyright (c) 2015 The NetBSD Foundation, Inc. .\" All rights reserved. .\" .\" This code is derived from software contributed to The NetBSD Foundation .\" by Christos Zoulas. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS .\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED .\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR .\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" .Dd June 5, 2017 .Dt BLACKLISTD.CONF 5 .Os .Sh NAME .Nm blacklistd.conf .Nd configuration file format for blacklistd .Sh DESCRIPTION The .Nm files contains configuration entries for .Xr blacklistd 8 in a fashion similar to .Xr inetd.conf 5 . Only one entry per line is permitted. Every entry must have all fields populated. Each field can be separated by a tab or a space. Comments are denoted by a .Dq # at the beginning of a line. .Pp There are two kinds of configuration lines, .Va local and .Va remote . By default, configuration lines are .Va local , i.e. the address specified refers to the addresses on the local machine. To switch to between .Va local and .Va remote configuration lines you can specify the stanzas: .Dq [local] and .Dq [remote] . .Pp On .Va local and .Va remote lines .Dq * means use the default, or wildcard match. In addition, for .Va remote lines .Dq = means use the values from the matched .Va local configuration line. .Pp The first four fields, .Va location , .Va type , .Va proto , and .Va owner are used to match the .Va local or .Va remote addresses, whereas the last 3 fields .Va name , .Va nfail , and .Va disable are used to modify the filtering action. .Pp The first field denotes the .Va location as an address, mask, and port. The syntax for the .Va location is: .Bd -literal -offset indent [
|][/][:] .Ed .Pp The .Dv address can be an IPv4 address in numeric format, an IPv6 address in numeric format and enclosed by square brackets, or an interface name. Mask modifiers are not allowed on interfaces because interfaces can have multiple addresses in different protocols where the mask has a different size. .Pp The .Dv mask is always numeric, but the .Dv port can be either numeric or symbolic. .Pp The second field is the socket .Va type : .Dv stream , .Dv dgram , or numeric. The third field is the .Va prococol : .Dv tcp , .Dv udp , .Dv tcp6 , .Dv udp6 , or numeric. The fourth file is the effective user .Va ( owner ) of the daemon process reporting the event, either as a username or a userid. .Pp The rest of the fields are controlling the behavior of the filter. .Pp The .Va name field, is the name of the packet filter rule to be used. If the .Va name starts with a .Dq - , then the default rulename is prepended to the given name. If the .Dv name contains a .Dq / , the remaining portion of the name is interpreted as the mask to be applied to the address specified in the rule, causing a single rule violation to block the entire subnet for the configured prefix. .Pp The .Va nfail field contains the number of failed attempts before access is blocked, defaulting to .Dq * meaning never, and the last field .Va disable specifies the amount of time since the last access that the blocking rule should be active, defaulting to .Dq * meaning forever. The default unit for .Va disable is seconds, but one can specify suffixes for different units, such as .Dq m for minutes .Dq h for hours and .Dq d for days. .Pp Matching is done first by checking the .Va local rules individually, in the order of the most specific to the least specific. If a match is found, then the .Va remote rules are applied. The .Va name , .Va nfail , and .Va disable fields can be altered by the .Va remote rule that matched. .Pp The .Va remote rules can be used for whitelisting specific addresses, changing the mask size, the rule that the packet filter uses, the number of failed attempts, or the block duration. .Sh FILES .Bl -tag -width /etc/blacklistd.conf -compact .It Pa /etc/blacklistd.conf Configuration file. .El .Sh EXAMPLES .Bd -literal -offset 8n # Block ssh, after 3 attempts for 6 hours on the bnx0 interface [local] # location type proto owner name nfail duration bnx0:ssh * * * * 3 6h [remote] # Never block 1.2.3.4 1.2.3.4:ssh * * * * * * # For addresses coming from 8.8.0.0/16 block class C networks instead # individual hosts, but keep the rest of the blocking parameters the same. 8.8.0.0/16:ssh * * * /24 = = .Ed .Sh SEE ALSO .Xr blacklistctl 8 , .Xr blacklistd 8 .Sh HISTORY .Nm first appeared in .Nx 7 . .Fx support for .Nm was implemented in .Fx 11 . .Sh AUTHORS .An Christos Zoulas